SCSM Series Horizontal Impact Sand Maker
SCSM Series Horizontal Impact Sand Maker is especially designed by SANME for making sand from limestone and other soft ores. It integrates high efficiency sand making and fine shaping. It is characterised by high yield, low power consumption and low powder content in the finished products.




Capacity
120-280 t/h
Max feeding size
100mm
Raw materials
limestone and other soft ores
Application
Features and benefits
Efficient sand production and particle selection grain by grain
Adopting innovative technology of multi-stage crushing chamber, the sand production rate can reach up to 60% -80%. After the material is impact crushed, small particles are easily discharged while large ones are guided to the additional crushing area for finer impact crushing so as to ensure better particle size of the finished product.
Intelligent grading and precise control
Equipped with advanced adjustable impact racks, the crushing chamber can be flexibly adjusted according to actual feeding and finished product requirements so as to easily obtain the desired grading of finished materials.
Energy saving and cost reduction
Its power consumption is 40%-50% lower compared to ordinary impact sand making machine. This means lower energy consumption, higher energy efficiency, and less operating costs so as to give customers an advantage in competition.
Low powder content, high quality
Compared with ordinary impact sand making machine, the powder content of the finished product is reduced by about 10%, which significantly improves the quality of mechanism sand.
Product Structure Drawing
Product Data
Model | Max Feeding Size(mm) | CapaCity(t/h) | Motor Power(kW) |
SCSM4763 | 50 | 120-180 | 280 |
SCSM5563 | 80 | 140-220 | 315 |
SCSM5579 | 100 | 150-280 | 355 |