SMCT series Iron removal stabilized feeder
SMCT series iron removal stabilized feeder is a new type of feeding machine independently developed by Shanghai Sanme Mining Machinery Corp., Ltd., which integrates feeding material and removing iron functions. This machine can not only feed block, granular and powder materials from storage bins or hoppers to receiving devices evenly, continuously or quantitatively (for example, feeding raw material to belt conveyors, bucket elevators, screening machine, crushers,etc.), but also remove heavy and large unbreakable materials in raw material, including magnetic,weakly magnetic, and non-magnetic metals, especially shovel-tooth weakly magnetic metals. It is effectively protecting the normal operation of subsequent machine (such as cone crushers, impact crushers, etc.). SMCT series iron removal stabilized feeder can be widely used in mining,metallurgy, coal, building materials, chemical industry etc.
Capacity
160~1400t/h
Max feeding size
≤500mm
Raw materials
raw material, including magnetic, weakly magnetic, and non-magnetic metals.
Application
mining, metallurgy, coal, building materials, chemical industry etc.
Features and Benefits:
Reduce the frequency of weakly magnetic or non-magnetic unbreakable objects entering the crusher
When raw material moves forward in the feeder trough, it will be stratified, and the objects with high specific weight will gradually sink to the bottom and be collected in the iron collecting trough. It can collect weakly magnetic or non-magnetic unbreakable objects which cannot be adsorbed by the magnet.
It should be noted that this series of feeder cannot completely collect unbreakable objects, just can only reduce the frequency of unbreakable objects entering the crusher.
Easy installation and maintenance, low operating cost
Small size, light weight, simple structure. Easy to install and maintain, low operating cost.
Higher feeding accuracy
The feeding flow of raw material can be changed,opened and closed instantaneously, the feeding capacity has a high accuracy.
Adjust the feed capacity without grade, more convenient
The feed capacity can be easily adjusted without adjusting the eccentric block after adding the distribution motor regulator.
Less wear on the feed trough
The raw material in the feed trough is continuously thrown up during the feeding process and jumps forward along a parabolic trajectory, therefore, the wear of the feed trough is small.
Not applicable to explosion-proof requirements
This series of feeder is not suitable for occasions with explosion-proof requirements.
Product Data
Model | Max Feeding Size(mm) | Vibrating Frequency(r/min) | Double Amplitude(mm) | Capacity(t/h) | Motor Power(kw) | Size of Funnel(W*L*H)(mm) |
SMCT60200 | 300 | 975 | 6-9 | 160-300 | 2*2.4 | 600*2000*250 |
SMCT90250 | 350 | 975 | 6-9 | 290-540 | 2*3.2 | 900*2500*300 |
SMCT120300 | 500 | 975 | 6-9 | 510-850 | 2*3.7 | 1200*3000*400 |
SMCT150300 | 500 | 975 | 6-9 | 640-1100 | 2*5.5 | 1500*3000*400 |
SMCT180300 | 500 | 975 | 6~9 | 770~1280 | 2*5.5 | 1800*3000*400 |
SMCT200350 | 500 | 975 | 6~9 | 850~1400 | 2*7.5 | 2000*3500*400 |